Press Enter to the main content area
:::

Taipei International Plastics & Rubber Industry Show-Product list

:::

Product list

  • Mold Changer System

    Description:Shorten the operation time of mold change. Auto position checking of mold changer moving. Automatically check the stroke of mold open, arrival and positioning in the process of mold move-in. Device for preventing mold sliding.

  • Quick Die Change System

    Description:It's an era for making high frequency of die changing with multiple patterns and small quantity. In order to save die changing time and ensure operational safety. Capable of pressure inspection and interlocking with machines. The movements between each devices will be pined down mutually in order to ensure operational safety. Replacing the traditional method which uses screws to fix dies. Can pull out and push in the die from the plate easily.

  • Air Driven Hydraulic Pump Unit

    Description:Use air to drive hydraulic pump. Once the outlet hydraulic pressure reaches the setting pressure, it will stop driving and won't waste any energy. If the outlet pressure is reducing, it will supplement pressure automatically to maintain the pressure continuously. The outlet pressure of the pump and the pneumatic pressure of driving are as direct ratio. The outlet pressure will base on the adjustment of pneumatic pressure to change. The circuit control system has the function of check. If there is no pneumatic pressure, the hydraulic pressure will be maintained. The best application is for work clamping systems or hydraulic pressure supply system which needs to maintain pressure for a long time but less operate. It has the function of inspection pressure and can be interlocked with the machine.

  • Mold Flip Device

    Description:Mold flip device could help in flipping the mold and shorten up the operation time of mold repairing and maintenance. Mold flip device is driven by electric hydraulic motor and move the mold through hydraulic power. Mold can be turned at any angle. Using mold flip device helps to raise work efficiency and avoid accidents at work place. If power shuts during mold flip, each hydraulic circuit is designed with the function of checking and avoiding oil leakage and the device will stop at the final stage.

  • Quick Mold Change System

    Description:It is an era for making high frequency mold change with multiple patterns and small quantity. In order to save time for the mold change and ensure the safety of the operation. Each hydraulic circuit has the function of checking and avoiding oil leaking. This system can add pressure automatically when the pressure reduction. Each hydraulic circuit has the function of inspection pressure and can be interlocked with the machine. It adopts the intersecting direction to clamp the mold. There are several functions to avoid operation error.

  • Electro-Permanent Magnetic Quick Mold Change System

    Description:Safety-Magnetic force remain permanently after magnetization Energy Saving-Over 95% power saving More Time Saving-More than 90% time is saved Durable-IP67 water proof Higher Yield-The mold won't be deformed because of same force on back plate Maintenance friendly-None spare parts reuired 8 special safety function designs

  • Overload Protector

    Description:Overload Protector is equipped in Press machine to check hydraulic pressure of cylinder inside the slider. If happen overload, the hydraulic pressure of cylinder will be released immediately within 3/1000 seconds. When happen overload, in order to protect the press and die, the press will stop working immediately after receiving the signal from limit switch. After happen overload, the air will drive hydraulic pump to supply normal working pressure immediately and the press can work normally. It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process.

HOME