Press Enter to the main content area
:::

Taipei International Plastics & Rubber Industry Show (Rescheduled.)-Product list

:::

Product list

  • Bandknife horizontal vacuum splitting machine

    Description:APPLICATION: EVA,PE,RUBBER,SBR,NBR,CR,EPDM,etc... foam Splitting. FEATURES: ※ Friendly PLC inter-face,computer touch screes.Easy to operate. ※ Thickness controlled and re-located by PLC. ※ The position of blade controlled and re-located by PLC. ※ Automatic Sliced Piece Counting Function. ※ Dusty collector for blade sharpener. ※ Close tolerance: +/- 0.1mm (When starting with level material)

  • VERTICAL TYPE RUBBER INJECTION MOLDING MACHINE

    Description:FUNCTIONS: 1. GIVES HIGHER INJECTION PRESSURE, MATERIAL DIRECTLY FLOW INTO MOLD CAVITIES THROUGH RUNNER. 2. SCREW REVERSION TO RETURN MATERIAL. 3. CHECK VALVE, INJECTION NOZZLE ASSEMBLE/DISASSEMBLE EASILY. 4. SERVO MOTOR, CLOSE-LOOP DESIGN FEATURES: 1. SUITABLE FOR HIGH HARDNESS RUBBER MATERIAL 85°_90° AND LOW FLUIDITY RUBBER MATERIAL, EX.: NR, FKM…ETC. 2. RUBBER MATERIAL ALTERNATE AND CLEAN EASILY, SAVES TIME AND RUBBER MATERIAL. 3. WITH INJECTION NOZZLE LIFTING UP SYSTME TO AVOID CURED RUBBER. 4. HYDRAULIC CIRCUIT WITH ENERGY-SAVING DESIGN TO SAVE MORE COST.

  • HORIZONTAL RUBBER INJECTION MOLDING MACHINE

    Description:FUNCTION: 1. FIRST IN FIRST OUT DESIGN. 2. HORIZONTAL STRUCTURE, MOLD OPEN DESIGN. 3. DEMOLDING SYSTEM FULLY AUTOMATION. FEATURES: 1. FIRST IN FIRST OUT DESIGN FOR EASY RUBBER MATERIAL CLEAN, CAN INJECT HIGH HARDNESS RUBBER MATERIAL FKM, NR…ETC. 2. HORIZONTAL DESIGN WITH THE AUTOMATIC DEMOLDING SYSTEM MEET FULLY AUTOMATION PRODUCTION LINE. 3. FULLY AUTOMATION PRODUCTION LINE CAN SAVE LABOR AND REDUCE REJECTION RATE.

  • VERTICAL TYPE RUBBER INJECTION MOLDING MACHINE(LIQUID)

    Description:FUNCTIONS: A, B DOSE MIXED LIQUID INJECTION MOLDING MACHINE FEATURES: 1. THE THIRD DOSE C WITH COLOR CAN BE MEASUREMENT CONTROLED. 2. FULLY AUTOMATION PRODUCING

  • Bandknife splitting machine

    Description:Features: ●Automatic band-knife adjustment: The front edge position of the blade is monitored by a sensor and knife moves forward automatically to correct position as knife gets Narrower while grinding. ●Band-knife is continuos sharpened while Splitting. ●Motorized height adjustment of the upper and lower Feeding Roller to regulate layer thickness. ●Vacuum dust collector for blade sharpener. ●Splitting tolerance:+/-0.05mm or +/-1%(depend on material) When starting with level material.

  • WATER COOLING AUTO SLICING MACHINE

    Description:APPLICATION: COOL down to room temperature about 30 ℃ (After mixing and rollers material temperature about 120 ℃) FEATURES: 1.Special engineered auto-feed feature.It will guide the material to cooling wheels automatically.The whole process from cooling to slicing is fully automted. No human interaction involved hence greatly reducing risk of hazard. 2.The surfaces of the cooling wheels are made of satainless steel.Material will be encountered with cooling wheels to provide twice the cooling effect. 3.This machine applies cold cutting method: a. No electric heater is used on the machine.The old poor cutting problem caused by the insufficient electric heating temperature and the bad electricity conduct defect cause by the dust attached to the electeric heating structure shall never happen again. No deterioration of head point and the rear end of the working piece shall be affected by the electric heater temperature. b. Solve the problem of old electric heating cutter such as waste material, laber and time.while heating cutter cats on the material might cause burn mark on the front and rear portions. Due to problem, user needs to cut-off the burn mark manual. 4.The cutting length setting is done by the counter.High precision.Able to save the error material for each cutting. 5.It does not need old type cotton conveying belt which may avoid the fall off of the threads after the conveying belt is used for long time and to stick on the materil to cause bubbled during forming further to upgrade the quality. 6.Every cooling wheel is equipped with a cleaning brush.It can provide continuous cleaning during operation.No contamination will be introduced to the processed materal.

  • THERMOELECTRIC CONJUNCTION & LOOP MATERIAL AUTOMATIC SPLITTING EQUIPMENT

    Description:FC-32-A APPLICATION: Welding and joining EVA, PE, Sponge sheets into roll by thermoelectric heat. FEATURES: 1.Use thermoelectric heat welding and joining,doesn't need to use glue any kind of adhesives.(ebvironment safe) 2.Motorized cutting front,rear and both side protion of material,and welding at once.Save time and increase the productivity. 3.Laser guide line is amicable to operation. FC-32-B APPLICATION: Splitting(skiving)PE or EVA sponges into layer roll after sponge sheets have been jointed into roll. FEATURES: The production flow is motorize and automatic.(Easy to operate)

  • Intermesh Mixer

    Description:(1)Quick cleaning (2)Superior Dispersion (3)Maximum Cooling (4)Single Pass Mixing (5)Shorter Mixing Cycle

  • Heavy-Duty Pressure Kneader

    Description:Rubber and plastic compounding manufactures have been troubled for a long time that either KNEADER or MIXER has advantages and disadvantages. Our company has developed a new-type kneader, which adopts hydraulic pressure pressurization and the machinery itself re-enforce the structural. New SKM type kneader has much more KNEADER of output, it also has the advantages KNEADER has, to provide you with better choice when coordinating production line.

  • Single Screw Extruder

    Description:1. Abandoning the complicate roller feeding process, it saves Labor Cost and Time. 2. Easy to change material color without any residue. 3. Adjustable speed to co-operate with the production rate. 4. Simple strip or sheet discharge device could supply material for various types of rubber injection molding machine. 5. More safety than traditional roller type machine 6. High extruding amount and low power consumption.

HOME