- Online Date: 2014/08/25
- Modify Date: 2020/06/01
Microprocessor Controlled High Speed Dryer GP series
- YE PIN CO., LTD.
- Taipei Nangang Exhibition Center, Hall 1 (TaiNEX 1)
- Product Model：HS-100GP
GP series are suitable
for below items.
1.Small injection molding production.
2.Small extruding production.
3.Frequently changing plastic production
GP series's features
1. Shortening half of the drying duration.
2. Effectively increasing transparency for 3C products, i.e. lens backboards.(PC,PMMA)
3. Effectively reducing the generation of gas during the injection molding and effectively reducing the number of cleaning the molds (PA46,PPS) so as to increase mobility.
4. Reducing ripples caused by insufficient drying and thus increasing product validity and quality.
5. Increasing drying to the raw material to enhance product stretching resistance, intermolecular combining force and hardness. Due to less moisture in the raw material, less resistance is left in the raw material to hinder intermolecular combination.
6. Reducing cost for drying equipment and cost for drying plastic materials_
7. Saving electricity fee for drying for more than 40%_
8. The equipment is able to ensure the water containing rate drops to 0.02%(200ppm) so as to increase product quality.
9. There are different reasons for defected products, especially when the plastic material is not fully dried.
10. Easy access two stage cyclonic filter removes fines to l micron.
11. Standard microprocessor controlled.
12. LED lights monitor system functions.
Dehumidifying Dryers Specifications
SUS304 WIDTH 395
AIR FLOW RATE(m3/hr) 120